Overview

A water bourne, highly durable, flexible opaque finish for exterior wood, weathered plastic, steel, concrete, and masonry. Ideal for the renovation of weathered and uneven exterior surfaces or where a complete change of colour is required. Superdec has been formulated to naturally weather ensuring the coating remains flexible and resistant to cracking, peeling, and flaking.

• Self priming and undercoating
• Flexible finish resistant to flaking and cracking
• 10 years durable protection
• Ideal for renovating weathered surfaces

Preparation

Always ensure the surface to be painted is clean, dry, and dirt free to ensure adhesion.

• Treat any resinous knots with an appropriate blocking primer, do not use a "knotting agent".
• Degrease any exposed bare timber by wiping with a cloth dampened with methylated spirits.
• Fill any minor defects, imperfections, or open joints with .
• Any non-preservative treated softwood timber should be treated with two liberal coats of .
• Do not use Sadolin Superdec on substrates that have had water-repellent preservative treatments applied.
• Base stained and primed joinery - Lightly abrade, in the direction of the grain. Do not break through the surface coating.

Application

It is recommended to perform a test patch on a small area of the surface to be painted to ensure you are happy with the finished results. Do not apply if there is a risk of rain, or when temperatures are below 8°C or above 25°C.

• Stir the product thoroughly and apply using a good-quality brush.
• Do not thin.
• Pay special attention to end grain, tops, and bottoms of the door and under cills for full weather protection.
• Apply two coats of Sadolin Superdec Opaque allowing 16-24 hours between coats.

Note: Always follow manufacturers instructions found on the tin.

Aftercare & Storage